…ey are suppose to be singing anyway. Once the face is good and dry. I used Mod Podge to seal it to. (I love Mod Podge, you can use it for so many things). Adding Doll Hair Now add you doll hair by using your staple gun to staple it in place. You could hot glue it, but I have found that if something sits in the sun for long the hot glue comes loose. Adding The Sock Cap Now put your Carolers sock cap on, pull it down over the sides, so not to see th…
Search Results for: Mod podge
Days ‘Til Christmas Countdown Truck Makeover
…nd used a paint marker to add the numbers back on, and gave them a coat of Mod Podge. 24 hours later I used a damp paper towel to dampen the transfers and then rubbed gently to remove the paper leaving the wording in place. Next I did a little bit more detail work then splattered the days ‘til Christmas truck with an old toothbrush and black paint. Attached the wheels and the Christmas tree using wood glue. And gave the whole piece two coats of Mo…
Super Simple Valentine Décor
…of some scrapbook paper and cut it out a little larger. Then add a coat of Mod Podge to one side of the simple Valentine Day décor heart and attach the scrapbook paper heart smoothing it down preventing any wrinkles. Once dry use the craft sander and sand off the overlapping edges and distress the edges of the heart. Wipe off the dust then add a coat of Mod Podge to both sides. While you’re waiting for the heart to dry. Take the wood pieces out an…
Painted Light Bulb Santa Ornaments
…d to add some spackles to the Santa’s. Each ornament got two more coats of Mod Podge to help protect them from breaking. To top off the ornaments by adding some faux greenery, berries, and bells to the top of each ornament. I made three hand-painted light bulb Santa ornaments and the rest of the light bulb Santa’s will be use for a light bulb Santa garland coming next week. Supplies for Santa Ornaments Light bulbs Mod Podge Twine White chalk paint…
Dollar Tree Fall Garland Ideas
…int. Twine Paintbrush Toothbrush Scissors Mod Podge Quick tip: adding some Mod Podge to the ends of the twine makes it a little easier to thread the beads. Dollar Tree Fall Garland Start off by giving the wood pumpkin two coats of orange paint on both sides, and the ghost two coats of white. Paint the stem green. Once dry use a flat brush and float around the edges of the ghost with grey. Use burnt sienna to float around the edges of the pumpkin….
Diy Dollar Tree Welcome Signs
…printed them out. Then cut out each welcome print, and add a light coat of Mod Podge to the inked sides and placed them onto the Dollar Tree metal pigs, pressing them down and working out any bubbles or wrinkles. Once dry dampen the back of the prints and rub gently to remove the paper backing leaving the words welcome showing through. Add a coat of Mod Podge for protection on these cute Welcome Signs. If you don’t have a laser printer to make rev…
Mini Easter Cutting Board Décor
…rbon paper. Base coat the carrots orange and the carrot tops in green. Use Mod Podge to transfer the reverse carrots print. While the transfer print on the mini-Easter cutting board was drying. I used a small detail brush to add the details on the hand-painted carrots with burnt sienna and black forest green for the tops. Now go back and dampen the transfer print with a paper towel. And gently rub the paper backing off till the words show clearly….
Easter Door Knob Hanger
…ittle comma on the nose. To seal and protect the hand-painted bunny I used Mod Podge. Cut a piece of twine about two foot and dip the ends into Mod Podge and rub on about two inches. Let dry. This will make it easier to thread the twine through the holes. For the Easter door knob hanger to hang flat against the door thread both ends of the twine through the wood slice. Then bring both ends through the loop and pull tight. Now it’s time to start st…
Cutting Board Funnel Planter
…you could use a stencil instead. Cut the image out and use a thin coat of Mod Podge and place at the top of the cutting board. Press down firmly and work out any air bubbles or wrinkles. Give it a few hours to dry then dampen the back of the transfer paper and rub gently until only the transfer is left showing on the cutting board funnel planter. Give the cutting board a coat of Mod Podge to seal and protect. To attach the funnel, drill a small h…
Decorative Wood Hang Tags
…. Don’t rub to hard or you will rub the words off. Add one or two coats of Mod Podge to seal and protect. Drill holes in the end of each tag and add a wooden bead and jute to hang by. That’s is for these fun decorative wood hang tags! Supplies for Decorative Wood Hang Tags Wood ¼” x 1 ½” x 6” Black chalk paint White chalk paint Paintbrush Mod Podge Jute 11” pieces Wood Beads Drill Finger sander Laser Printer More Fun Printer Transfer Projects Day’…
- « Previous Page
- 1
- 2
- 3
- 4
- 5
- …
- 13
- Next Page »