DIY Faux Leather Cross With Wings

This Diy Faux Leather Cross With Wings was a special order that I received. I was asked to paint the larger cross so that it would resemble leather

Diy Faux Leather Cross

I never having painted anything to look like leather before, so for my Diy Faux Leather Cross, I of course turned to my good friend Google, LOL. You can find out how to do just about anything on Google.

[tweetthis display_mode=”box”] How to make a Faux Leather Cross With Wings #diy #cross #MixedKreations[/tweetthis]

First draw the wings on a piece of plywood. Cut out, and sand.

I forgot to take this picture, but now paint the wings with antique white. Need to coats to cover. Let dry thoroughly between each coat. Then float burnt umber around the edges. Once dry sand the edges to give it a rustic worn look.

Prime the large cross with gesso.

Apply the antique gold for the undercoating of the painted leather technique.

Mix up a small portion of Mod Podge (1 part) and burnt umber (2 parts). Mix well. Now grab one of the plastic bags and dip into the mixture and start dabbing onto your cross. Continue until you have the cross coated. Then turn your bag inside out for a clean part, and go back over it while it’s still wet, dabbing to remove any excessive paint.

Once dry mix up another small portion of Mod Podge, and burnt umber. This time using less Mod Podge, and a little more burnt umber. Get a clean plastic bag and repeat the process above until covered. Let dry, and if needed apply another coat. The less Mod Podge, and more burnt umber used will make the cross darker. But you do need some Mod Podge for the glaze.

[tweetthis display_mode=”box”]Trying out a new paint technique, faux leather cross with wings. #diy #cross #MixedKreaitons[/tweetthis]

Once you get the cross how you want it, and its dry. Mark off where you want the decorative tacks, and then drill small holes to get the tacks started, so not to split your cross when you hammer them in.

Now it’s time to assemble your cross with wings using gorilla glue, and it only takes a little bit, because it swells up (found that out the hard way). I did nothing to the little cross; I liked it just the way it was.

Here is the cross sitting in my leather chair. I thought that I was getting it darker then it actually turned out, but I am still happy with how it looks.

How do you like my faux leather cross with wings? Have you ever painted anything on wood to resemble leather? If so, I would really like to see how your’s turned out.

***This post contains affiliate links, if you click on an affiliate link & buy something I may receive a small commission at no extra charge to you. The affiliate money I earn helps pay the expenses to keep this site running. Please read my full advertising disclosure for more info. Thanks so much for your support!***

Supplies Needed For My Diy Faux Leather Cross

Large cross
Small cross
Wings cut from plywood
Gesso
Antique gold acrylic paint
Burnt umber acrylic paint
Antique white acrylic paint
Mod Podge(affiliate) Great stuff!
Paint brush
Couple plastic grocery bags
Decorative tacks(affiliate) These are similar to the ones I used.
Gorilla glue
Skill saw
Drill
Sandpaper
Hammer

More Paint Technique’s You May Enjoy

Faux Galvanized Metal Letters
Faux Leather Cross With Wings
Faux Sea Glass
Homemade Chalk Paint